Home » Actuation » Pneumatic Actuators » Double Acting & Spring Return Pneumatic Actuator

DOUBLE ACTING & SPRING RETURN PNEUMATIC ACTUATOR

Pneumatic rack and pinion actuator and double acting pneumatic actuator and spring return actuators available for ball valves and butterfly valve automation. Top quality bearings and actuator seals for low friction high cycle life. Pneumatic actuators come in various sizes for almost any sized valve on the market. Sizes range from DA-32 to DA-600 and SR-45 to SR-600. Brand new heavy duty, compact body design.

Rating: 5/5

Ask a Question or Request Customized Quote

Manufacturer: Valtorc

Product Description, Dimensions and Specifications PDF

Series VT (Double Acting / Spring Return Pneumatic Actuator)

Our pneumatic actuator series VT (which is a direct replacement for our previous PA-1000 actuator) is a high quality, durable housing that contains a powerful actuator capable of turning the biggest valves in the market. This series of actuators (in spring return operation and double acting) are capable of being fail to open and fail to close. Using compressed filtered air, not necessarily lubricated is recommended. With a brand new, compact design - this Spring Return/Direct Acting pneumatic actuator is ideal for butterfly valve and ball valve automation.

SPRING RETURN ACTUATION CONFIGURATION

CCW - (Counter Clock Wise) Air is supplied to Port A forcing the pistons away from each other (towards ends), rotating the drive pinion counter-clockwise and exhausting air out of Port B.

CW - (Clock Wise) Air is supplied to Port B forcing the pistons toward each other (towards center), rotating the drive pinion clockwise and exhausting air out of Port A.

DOUBLE ACTING ACTUATION CONFIGURATION

Fail CCW - (Counter Clock Wise) Air is supplied to Port A forcing the pistons away from each other (towards ends), rotating the drive pinion counter-clockwise, compressing the springs and exhausting air out of Port B.

Fail CW - (Clock Wise) Air failure (loss of pressure) allows the compressed springs to force the pistons toward each other (towards center), rotating the drive pinion clockwise and exhausting air out of Port A.

PNEUMATIC RACK AND PINION ACTUATOR

Available for valves sizes 1/4" up to 36"
Available in spring return or double acting configurations
Brand new heavy duty design/housing
Compact design
Pneumatic sizes available from DA32 - DA600; SR45 - SR600
Temperature ratings: 0C - 80C; from -20C - +80C
Air only temperature: -40C to +150C (in proper execution)
Minimum 40PSI for air supply, maximum air supply is set at 130PSI
Compressed filtered air should be the operating media - not necessarily lubricated (if lubricated air is used, either non-detergent oil or NBR compatible oil must be used)
Standard rounded end caps help to accumulate contamination
Heavy duty bearings and seals form low friction and high cycle life
Durable, trouble free operation - detailed installation manuals included
Modular preloaded springs with metal spring guides for use in extreme temperatures (high and low)